What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 15:00

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Because the load is inductive, the current lags the voltage.(by a bit).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What's an underrated/unknown novel or series that you think deserves more attention?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
WCWS Game 2: Texas Tech evens series with 4-3 win, setting up decisive Game 3 - Yahoo Sports
But… the neutral is now “floating” because of the 1 ohm resistance.
but this device (an Inductor) … impedes the rapid changes in the current.
what exactly is a ‘surge’ protector?
Why do people think Mirko is boring in My Hero Academia?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It seems Mohan does not understand the difference between a comment and an Answer.
One
This one hit behind the barn.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
First Sentence:
Is visiting holy shrines (dargahs) or graves haraam in Islam?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–14 [Omar Gharbi Omar Gharbi ]
A circuit breaker is similar, but is resettable.
The other is “what does a “fuse” do?”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
An AC voltage/ current source, and an ac inductive load.
I post the exact comment here.
SpaceX May Be Failing to Get Starship Working at All - futurism.com
He then describes Rainy Season and Lightning.
Barnstars:
What is lightning?
Jennie Garth 'Never Felt More Confident' as She Poses In First Underwear Photoshoot at 53 - TooFab
The bolt then partially travels down the line to your home.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Edit 2024–10.
We've Finally Seen The Skyscraper Tsunami That Shook Earth For 9 Days - ScienceAlert
These are simplified answers to the original question, and does not change anything I wrote above.
eight
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It also is a device that limits the change in current flow.
At one ohm, the resistor has a maximum of 1 watt power.
The MOV will conduct when the voltage exceeds 50% of line voltage.
[old diagram got deleted by accident]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These devices are installed between the “hot” and “neutral” and protective ground.
This is where this question deviates from being a 'generic' question, and becomes more specific.
A fuse is a non-resetable over current circuit protector.
What does a fuse do?
This is 'the assistant's answer'
the problem then depends on "how fast does the fuse operate?".
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There are two important concepts here.
Upvotes:
nine
2024–10–10[John johnson John Johnson ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–16 [ OO OLAOYE OYEBODE ]
a photo is worth a thousand words.
The third is lightning and “how it gets conducted into a home.”
There are three different concepts here that are getting confused.
One is “what exactly is in a ‘surge protector’ ? ”
This is where the MOV conducts again, and dissipated the energy.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, what happens?
At least they know the answer if they wanted it.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
(Dc diagram shown, AC is similar).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Now when you have a certain ac resistance, then a current flows in a loop.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
In schematic diagrams this is the symbol for a fuse:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Here is a simplified AC power diagram.
He then asserts :
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This device then solves the entire problem.
[image of Common-mode choke]
But it can get overloaded, and no longer works.
but I think this circuit , shows a few more pieces.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.